FCD available: My_HP No.#1,#2,#3,#4,#5 PPM (Parts Per Million) calculation example: PPM=(1-(144.660/144.647))*1000000=-90 PPM=(1-(431.040/431.001))*1000000=-90 Since the initial value of PPM was -21.0 then my PPM=-21.0-90.0=-111.0
[Supplement] The operation of SDR# requires the accurate setting of PPM value. In addition, I am automatically tracking the many satellite using Orbitron and DDE in (2). And I am particularly tracking 2.4GHz of DTUsat-2 or HORYU-4 by manual operation using sdrtocal.xls in (3). (1) Anntena and Frequency tracking: Calsat32 (Japanese) http://www.asahi-net.or.jp/~ei7m-wkt/numbr645.htm http://www.asahi-net.or.jp/~ei7m-wkt/numbr752.htm (2) SDR# tracking: Orbitron + DDE (Automatic Operation) http://www.ne.jp/asahi/hamradio/je9pel/sdrshdde.htm http://www.ne.jp/asahi/hamradio/je9pel/sdrshdd2.htm (3) SDR# tracking: Calsat32 + sdrtocal.xls (Manual Operation) http://www.ne.jp/asahi/hamradio/je9pel/calsatdd.htm About PPM setting in SDR#: http://www.ne.jp/asahi/hamradio/je9pel/fcd+_ppm.htm http://www.ne.jp/asahi/hamradio/je9pel/rtlsdrdo.htm http://www.ne.jp/asahi/hamradio/je9pel/sdrshdd2.htm