Research and Development
In order to improve press die manufacturing technology at our company,
we have carried out research in collaboration with Doshisha University
and presented at various conferences. In addition to our particular objective
of building digital manufacturing systems, we have done research regarding
the search for vision-based manufacturing technology as well as research
on the creation of artistic forms utilizing knowledge of camera vision-based
digital manufacturing so that sculptors can create artistic works. Moreover,
we have also carried out research and development on a sustainable manufacturing
system using bamboo fiber for the purpose of environment protection.
Cooperation with Prof. Hirogaki of the Faculty of Science and Technology at Doshisha University
We receive regular guidance on die-related manufacturing technology and research and development methods from Dr. Toshiki Hirogaki, Professor in the Department of Energy and Mechanical Engineering in the Faculty of Science and Technology at Doshisha University.
In addition, because Professor Hirogaki is a leading expert on research regarding solutions to the environmental problems confronted by the manufacturing industry, we are receiving guidance regarding our intention to become an eco-factory.
Results of the study
- 2010
- 2010 International Manufacturing Science and Engineering Conference
Title:Development of Self-adhesive Bamboo Fiber Composite WithThree-dimensional Shape Using Fibers Extracted With Machining Cente
- 2000
- Proc. of FRC2000
Study on small diameter drilling for printed wiring board
(Eiichi Aoyama, Toshiki Hirogaki, Hisahiro Inoue,Mitsuru Nisizawa, Kouichi
Yamura, Hiromichi Nobe,Tsutao Katayama)
- 1999
- Proc. of AMPT’99 and IMC16 Vol.1
Drilled hole damage of small diameter drilling in printed wiring board
(Eiichi Aoyama, Hiromichi Nobe, Toshiki Hirogaki)
- 1997
- Composite StructuresVol.38pp.343-350
Investigation on cutting mechanism in small diameterdrilling for GFRP
(thrust force and surface roughness at drilled hole wall)
(Keiji Ogawa, Eiichi Aoyama, Hisahiro Inoue, Toshiki Hirogaki,Hiromichi
Nobe, Youji Kitahara, Tsutao Katayama, Munehisa Gunjima)
- 1997
- Proc. of ICCM-11pp.IV-343-351
Prediction of damage width in laser drilling ofprinted wiring board using
FEM
(Toshiki Hirogaki, Eiichi Aoyama, Hisahiro Inoue, Hiromichi Nobe,Keiji
Ogawa, Youji Kitahara,Tsutao Katayama)
- 1997
- Key EngineeringMaterialsVol.137 pp.123-130
Study on cause of internal damage of drilled GFRP
(In case of small diameter drilling of plain woven cloth)
(Hiromichi Nobe, Eiichi Aoyama, Hisahiro Inoue, Toshiki Hirogaki,Youji
Kitahara, Tsutao Katayama,Munehisa Gunjima, Keiji Ogawa,Yasukazu Okuno)
- 1995
- Composite StructuresVol.32pp.567-573
Study on small diameter drilling in GFRP
(Eiichi Aoyama, Hisahiro Inoue, Toshiki Hirogaki, Hiromichi Nobe, Youji Kitahara, Tsutao Katayama)
- 1995
- Proc. of Japan-U.S. CCM-VII
Investigation on damage in small diameter drilling in GFRP
(Eiichi Aoyama, Hisahiro Inoue, Toshiki Hirogaki, Hiromichi Nobe,Youji
Kitahara, Tsutao Katayam