AGWPE

AGWPE software

I decoded PCsat beacon using only AGWPE(AGW Packet Engine)
and AGWMONITOR, not using TNC, as follows at 8 Oct 2001.


1:Fm PCSAT-1 To APRS3 <UI pid=F0 Len=76 >[03:55:11z]
:BLN3PCSAT:www.ew.usna.edu/pcsat   for details abt operating

1:Fm PCSAT-1 To APRS2 <UI pid=F0 Len=76 >[03:55:30z]
:BLN2PCSAT:Welcome to a new facet  of satelites for mobiles.

1:Fm PCSAT-1 To APRS1 <UI pid=F0 Len=76 >[03:55:47z]
:BLN1PCSAT:Testing OK! GPS is off. Watch BLNS 4 user info about operatin

1:Fm PCSAT-1 To BEACON Via SGATE <UI pid=F0 Len=74 >[03:56:07z]
:072114z OPS-Normal on 145825 using only 1 pkt per 2 mins for now.

1:Fm PCSAT-1 To BEACON Via SGATE <UI pid=F0 Len=42 >[03:56:49z]
T#030,118,121,131,118,213,11111111,1101,1


AGWPE is available,

  http://www.sv2agw.com/downloads/

  AGWPE.ZIP ........ AGW Packet Engine
  AGWMONITOR.ZIP ... AGW Packet Monitor


Setup for PCsat,

  Select Port ...... LPT3:
  Tnc Type ......... Sound Card
  Tnc Radio Port ... 145.825Mhz 1200baud 


I copied 9600bps signals from UO-22 using only soundcard, not TNC,
using "MixW2" at 25 Mar 2002.

Setup in MixW2 as follows,

  http://www.mixw.net/

  MixW2 - Mode - Packet
        - Mode - Mode Settings - VHF 9600 baud G3RUH
        - Configure - Soundcard settings - Samplerate 22050


And I copied 9600bps signals from KO-25 using only soundcard, not TNC,
using "AGWPE" and "AGWMONITOR" at today, 29 Mar 2002.


1:Fm HL02 To QST <UI pid=F0 [DAMA] [EAX25] Len=39 >[09:56:40]
EIS:(3ca3bbb7) [s1] Timer:0 TxEnable:1

1:Fm HL02-11 To PBLIST <UI pid=F0 [DAMA] [EAX25] Len=11 >[09:56:43]
PB: Empty.

1:Fm HL02-12 To BBSTAT <UI pid=F0 [DAMA] [EAX25] Len=11 >[09:56:44]
Open 12a : 


Setup as follows in "AGWPE" for 9600baud,

 (1) Run "AGW Packet Engine.exe"
     Left click AGWPE icon on the bottom bar of WindowsXP
      - Properties - New Port
                      - Select Port (LPT3:)
                        SirialPort/modem BuadRate (19200)
                        TNC Type (SoundCard)
                          - Left  Channel - Check 9600b (G3RUH)
                          - Right Channel - Check 9600b (G3RUH)
                        TNC RadioPort - Port1 (436.500MHz 9600baud)

 (2) Run "Agwmonitor.exe"
     File - Properties - Enter your Callsign


And I copied 9600bps signals from UO-22 after KO-25 at 29 Mar 2002,
using "AGWPE" and "AGWMONITOR". [Time is JST=UTC+9]

1:Fm UOSAT5-11 To PBLIST <UI pid=F0 [DAMA] [EAX25] Len=11 >[15:11:55]
PB: Empty.

1:Fm UOSAT5-11 To PBLIST <UI pid=F0 [DAMA] [EAX25] Len=11 >[15:12:02]
PB: Empty.

2:Fm UOSAT5-11 To PBLIST <UI pid=F0 [DAMA] [EAX25] Len=11 >[15:12:16]
PB: Empty.

2:Fm UOSAT5-11 To PBLIST <UI pid=F0 [DAMA] [EAX25] Len=11 >[15:12:20]
PB: Empty.

2:Fm UOSAT5-11 To PBLIST <UI pid=F0 [DAMA] [EAX25] Len=11 >[15:12:22]
PB: Empty.

1:Fm UOSAT5-11 To PBLIST <UI pid=F0 [DAMA] [EAX25] Len=11 >[15:12:29]
PB: Empty.


AGWPE + Agwmonitor at 29 Mar 2002, [Time is JST=UTC+9],

2:Fm UOSAT5-11 To STATUS <UI pid=F0 [DAMA] [EAX25] Len=14 >[16:53:42]
B: 1696042849

2:Fm UOSAT5 To QST <UI pid=F0 [DAMA] [EAX25] Len=37 >[16:54:11]
SCZIP V1.9: OK 75b15 3B690997 75b20

2:Fm UOSAT5-11 To PBLIST <UI pid=F0 [DAMA] [EAX25] Len=11 >[16:54:27]
PB: Empty.

2:Fm UOSAT5-11 To BY1TSU <UI pid=BB [DAMA] [EAX25] Len=10 >[16:54:34]
OK BY1TSU

2:Fm UOSAT5-12 To BBSTAT <UI pid=F0 [DAMA] [EAX25] Len=11 >[16:55:12]
Open 12a : 


[Supplement]

AGWPE TCP/IP settings
http://www.ne.jp/asahi/hamradio/je9pel/agwtcpip.htm

Soundmodem linked to UISS and UI-View32
http://www.ne.jp/asahi/hamradio/je9pel/snd2uiss.htm

Soundmodem_9k6 linked to M-Cubed Decoder
http://www.ne.jp/asahi/hamradio/je9pel/sound9k6.htm