LitSat-1 23:22-23:31 UTC, 3 May 2014, Ele 38 SW-N-NE, 145.845MHz 9600bps FSK MixW V3.0.1 + Online_Kiss_Plus Ver8.5 + "LiSat-1 Decoder Ver1.83" LitSat-1 04:42-04:51 UTC, 6 May 2014, Ele 24 WN-N-ES, 145.845MHz 9600bps FSK G3RUH_SM V0.16b + Agw_Online_Kiss Ver2.1.2 + "LiSat-1 Decoder Ver1.83" MCubed-2 01:47-02:00 UTC, 10 May 2014, Ele 76 ES-Z-WN, 437.479MHz 9600bps GMSK SDR#1000 + MixW V3.0.1 + "MCubed2 Ground Station Client" MCubed-2 12:11-12:21 UTC, 8 Jan 2016, Ele 24 ES-S-WN, 437.479MHz 9600bps GMSK SDR#1327 + "High-Speed SoundModem" + "MCubed2 Ground Station Client"![]()
![]()
![]()
How to decode LitSat-1 using MixW (1) Setup MixW serial port bridge http://www.ne.jp/asahi/hamradio/je9pel/mixwbrid.htm (2) Setup Device Manager Pair#1: First emulated port: COM10 (for input) Second emulated port: COM11 (for output) Pair#2: First emulated port: COM7 (for input) Second emulated port: COM8 (for output) (3) Setup MixW Mode and Configure Mode ... Packet Mode settings ... Modem, VHF 9600 baud G3RUH Mode settings ... General, Check Emulate KISS TNC on TNC emulation port Configure ... Sound device settings, Samplerate 22050 Configure ... TNC emulation, Port COM10*, Baud rate 9600 (4) Edit onlinekiss.ini http://www.dk3wn.info/software.shtml TIMESERVER = time.windows.com COM_PORT = 11 COM_SETTINGS = 9600,N,8,1 MIRROR_COM_PORT = 7 MIRROR_COM_SETTINGS = 9600,N,8,1 (5) Setup LitSat-1 Decoder http://www.litsat1.eu/en/radio-amateurs/ Settings Port ... COM8 Baud rate ... 9600 How to decode LitSat-1 using G3RUH_SoundModem (1) Setup G3RUH_SoundModem Devices and Modems http://uz7.ho.ua/packetradio.htm Devices ... RX Sample Rate 44100 Modems ... LPF1 Width 7000 LPF2 Width 9000 (2) Edit agw_onlinekiss.ini http://www.dk3wn.info/software.shtml TIMESERVER = time.windows.com MIRROR_COM_PORT = 7 MIRROR_COM_SETTINGS = 9600,N,8,1 (3) Setup LitSat-1 Decoder http://www.litsat1.eu/en/radio-amateurs/ Settings Port ... COM8 Baud rate ... 9600 How to decode MCubed-2 using MixW (1) Setup MixW serial port bridge and Device Manager http://www.ne.jp/asahi/hamradio/je9pel/mixwbrid.htm (2) Setup MixW Mode and Configure Mode ... Packet Mode settings ... Modem, VHF 9600 baud G3RUH Mode settings ... General, Check Emulate KISS TNC on TNC emulation port Configure ... Sound device settings, Samplerate 22050 Configure ... TNC emulation, Port COM7*, Baud rate 9600 (3) Install Python 2.7 https://www.python.org/download/ (4) Install MCubed-2 Decoder http://exploration.engin.umich.edu/blog/?page_id=1933 (5) Run setup_pyserial.bat in MCubed-2 folder (6) Edit run_serial_to_tcp.bat in MCubed-2 folder tcp_serial_redirect.py -q -p COM8 -b 9600 --rtscts -P 12500 -i 0 -n JE9PEL (7) Edit config.props in MCubed-2 folder client.callsign=JE9PEL (8) Run MCubed-2 Decoder in the following order 1. run_serial_to_tcp.bat 2. run_gs_client.bat How to decode MCubed-2 using High-Speed SoundModem(UZ7HO) (1) Check "Enabled" in "KISS Server Port: 8100" HSM(UZ7HO) -> Settings -> Devices -> Server setup (2) Edit config.props in MCubed-2 folder radio.1.name=FCD+SDR# radio.1.address=localhost radio.1.port=8100 radio.1.type=KISS radio.1.tncport=1 client.callsign=JE9PEL client.id=JE9PEL_GS server.address=mxlab.engin.umich.edu server.port=12805 (3) Run MCubed-2 Decoder in the following order 1. Run SDR# 2. Run HS_SoundModem 3. Don't use run_serial_to_tcp.bat 4. Run directly run_gs_client.bat
![]()
![]()
![]()
![]()
[Supplement] http://www.ne.jp/asahi/hamradio/je9pel/mc2recov.htm