How to use KISS2ASC
KISS2ASC - Raw KISS/AX.25 to ASCII File Converter
> Copyright 1990 Paul Williamson, KB5MU
> All Rights Reserved.
>
> KISS2ASC converts a raw KISS AX.25 log file to readable ASCII.
> It was written specifically for Microsat ground station use.
> With this utility, there is no need to retain any ASCII log files.
> The ASCII log can be recreated on demand from the binary KISS log.
Firstly you must save a KISS file data from the satellite with WiSP.
Set up WiSP(GSC) as follows.
GSC - Setup - Satellite Setup - KO-25 - Edit -
- MSPE Settings - Log Kiss frames -Check
Log telemetry frames - Check
Secondly you run KISS2ASC on Dos Prompt such as the next example.
>kiss2asc abcdef.kss abcdef.txt
Then one text file can be recreated from the binary KISS file.
KISS2ASC available:
http://www.amsat.org/amsat/ftpsoft.html
WiSP available:
http://www.amsat.org/amsat/ftpsoft.html
ftp://ftp.amsat.org/amsat/software//win32/wisp/
WiSP installing:
http://www.ne.jp/asahi/hamradio/je9pel/wispinse.htm
WiSP information:
http://www.ne.jp/asahi/hamradio/je9pel/
Back to Top
Back to Home Page