How to use "WiSP-TLM" with WiSP32


---------------------------------
How to use "WiSP-TLM" with WiSP32
---------------------------------

This "WiSP-TLM" is the program to decode the satellite degital signals
with "WiSP16".  And you can use also it in "WiSP32" by the next way.

For example KO-25;

(1) Save "wisp.ini" used for WiSP16 in "C:/windows".

(2) Copy "wisp-tlm.exe", "kitsat2.cfg", "kitsat2.pag" in "C:/wisp".

(3) GSC - Setup - Programs - Menu Title - "Wisp-Tlm"
                             Startup Directory - "C:/wisp"
                             Program Name - "wisp-tlm.exe"

(4) GSC - Setup - Satellite Setup - "KO-25" - Edit - 
                  - General - TLM Config File - "C:/wisp/kitsat2.cfg"

(5) GSC - Setup - Satellite Setup - "KO-25" - Edit - 
         - MSPE Settings - General - (Check)LOG Telemetry frames

(6) GSC - Programs - "Wisp-Tlm" - Telemetry - Select Satellite - 
    - "KO-25" - Telemetry - Playback File - "KO-25" - 
    - (ex.)"99426k25.tlm" - Window - Communications - Telemetry - Play
                                     Computer         Forward
                                     Power
                                     Temperature
                                     Navigation


About "wisp.ini" in the above (1),
You need to install firstly WiSP16 (in Windows3.1), and GSC will
generate automatically "wisp.ini" after several satellite settings.

You install secondly WiSP32 (in Windows95) after WiSP16's deletion,
and you must do the same satellite settings in GSC(WiSP32). Please
you put this "wisp.ini" file in C:\windows.

Then GSC(WiSP32) will recognize "wisp-tlm.exe" in the above (3).
If you want to add new satellites, please edit in this "wisp.ini".

Example, please put the following 4 files in the next directory.
This "99426k25.tlm" was the telemetry file that I get from KO-25
at 26-Apr 1999, 02:13-02:20z.

     wisp.ini ....... C:/windows
     kitsat2.cfg .... C:/wisp        (for KO-25)
     kitsat2.pag .... C:/wisp        (for KO-25)
     99426k25.tlm ... C:/wisp/KO-25  (sample)


CF1.[Setup for KO-25]

     GSC - Setup - Programs - Menu Title - "Wisp-Tlm"
                              Startup Directory - "C:/wisp"
                              Program Name - "wisp-tlm.exe"

     GSC - Setup - Satellite Setup - "KO-25" - Edit - 
           - General - TLM Config File - "C:/wisp/kitsat2.cfg"

     GSC - Programs - "Wisp-Tlm" - Telemetry - Select Satellite - 
     - "KO-25" - Telemetry - Playback File - "KO-25" - 
     - "99426k25.tlm" - Window - Communications - Telemetry - Play
                                 Computer         Forward
                                 Power
                                 Temperature
                                 Navigation

You can get "wisp-tlm.zip" file on the next web, and you will find
cfg files for other satellites in this extracted file.
And you can get the updated "WiSP3215" program on the next ftp.

     http://www.ee.surrey.ac.uk/CSER/UOSAT/amateur/software/wisp.html
     ftp://ftp.amsat.org/amsat/software/win32/wisp/

'Wisp-tlm.exe' is a program for 'UO-22, KO-23, KO-25, TO-31, UO-36'
on WiSP32.   Please refer 'WiSP how to install' and 'CFG file link'
in my home page below.

For 'AO-16, LO-19', you are in need of 'tlmdc4.exe'.

     tlmdc4.zip (tlmdc4.exe) ......... Telemetry Decorder
     http://www.amsat.org/amsat/ftpsoft.html

And you must get 'KISS file' befor the fact from the satellite
with WiSP32.   Firstly check the followings setup in 'GSC'.

     GSC - Setup - Satellite Setup - LO-19 - Edit - 
           - MSPE Settings - Log Kiss frames
                             Log telemetry frames - OK
        (again)- MSPE Settings - Log Kiss frames
                                 Log telemetry frames - OK

And you specify this got KISS file name on DOS_PROMPT.
Then it will be automatically decoded to the numerical data.

     Tlmdc4 - F(Decode File) - Input raw data file to read: *.kss


CF2.[Configuration file]

     Uo5tlm.cfg  for UO-22
     Kitsat1.cfg for KO-23
     Kitsat2.cfg for KO-25 are in wisp-tlm.zip on the following web;
     http://www.ee.surrey.ac.uk/CSER/UOSAT/amateur/software/wisp.html

     Tmsat1.cfg  for TO-31 is on the following web;
     http://www.ee.surrey.ac.uk/CSER/UOSAT/amateur/tmsat/

     Uo12obc.cfg for UO-36 is in uo12tlm.zip on the following web;
     http://www.ee.surrey.ac.uk/CSER/UOSAT/amateur/uosat-12/


CF3.[Wisp.ini]

     Sample file;
     http://www.ne.jp/asahi/hamradio/je9pel/wisp-ini.htm


CF4.[Analysis for KO-25]

     http://www.ne.jp/asahi/hamradio/je9pel/ko25tlme.htm


----------------------------------------------
Name : JE9PEL/Mineo Wakita
Mail : je9pel@jamsat.or.jp
URL  : http://www.ne.jp/asahi/hamradio/je9pel/
QTH  : Yokohama Japan,  GL:PM95TJ
Date : Apr 11, 1999
----------------------------------------------


Back to Home Page