Simple SEEDS CW Telemetry Decoder


Developed by DK3WN, http://www.dk3wn.info/sat/afu/sat_seeds.shtml
Received by JA6PL at 02:10:00UTC 13May2008:
JQ1YGU SEEDS G4 00BF58F9 D27 FFE D94 1DD 6A0 1B3 121 1B7 A17 9E4 933 A2E 11 0000 0001 0001 0001 29EA 49 37 34
JQ1YGU SEEDS G4 00000000 111 222 333 444 555 666 777 888 999 AAA BBB CCC DE FFFF GGGG HHHH IIII JJJJ KK MM NO





Satellite Time: 6270076.5 sec   [72d 13:41:16]
------------------------------------------------------------------------
JQ1YGU SEEDS G4
00BF58F9D27FFED941DD6A01B31211B7A179E4933A2E11000000010001000129EA493734

Li-Ion Batt Voltage   : 4.11 V
Bus Voltage           : 5.00 V
Solar Cell 1 Current  : 385.74 mA
Solar Cell 2 Current  : 52.93 mA
Solar Cell 3 Current  : 188.21 mA
Solar Cell 4 Current  : 48.27 mA
Solar Cell 5 Current  : 32.07 mA
Solar Cell 6 Current  : 48.72 mA
Li-Ion Battery 1      : 6.45 C
Li-Ion Battery 2      : 8.76 C
Transmitter           : 14.31 C
Receiver              : 4.40 C
CW Intervall          : 3
Command Status        : 55
Switch                : 1 (ON)
Battery               : 3 (forced no-charge mode, Batt Voltage > 4.2 Volts)
Shunt Circuit         : 4 (shunt circuit active, auto shunt mode)
MPU reset (EPS)       : 0
MPU reset (FMR)       : 1
MPR Reset (C+DH)      : 1
MPU Reset (CW)        : 1
CW transmission       : 10730
Uplink Count          : 73
------------------------------------------------------------------------



I also analyzed using by 'SEEDS Analyzer Ver2.0.2'
http://cubesat.aero.cst.nihon-u.ac.jp/english/download_e.html





Then I noticed that the different value in 'Solar Cell 1-6 Current [mA]',
but I confirmed that the program 'Simple SEEDS CW Telemetry Decoder' was
the valid indication for Solar Cell Current.
Now I am asking for this matter to SEEDS GS.



H1=(5*((E1)*256+(F1)*16+(G1))/4096)*90.90909



SEEDS Analyzer Ver2.0.3 update





Cf.
http://cubesat.aero.cst.nihon-u.ac.jp/english/telemetry_e.html


Back to Top
Back to CubeSats index
Back to Home Page