How to decode Meteor-M N2 more update

I received Meteor-M N2 after a long time.
I made the necessary folder in advance while checking the error message
each time and put all the files in D:\meteorm2\meteorgis. And I started
MeteorGIS manually. It's wonderful that M2_LRPT_Analizer works automatically
after Start. It drew quickly in a pass tonight (23 Jun 2019).
Tnx.>JE1CVL, JO1PTD, JA0CAW

   

   

http://blog.goo.ne.jp/je1cvl/d/20190118
http://blog.goo.ne.jp/je1cvl/d/20201120
http://blog.goo.ne.jp/je1cvl/d/20210403
http://www.asahi-net.or.jp/~ei7m-wkt/numbr925.htm
http://www.radioamatoripeligni.it/i6ibe/meteor_m2/satellit.htm


[Procedure] by JA0CAW

  -> Receive by sdr#.
  -> Run GIS when it is locked.
  -> Lrpt works automatically when GIS starts up
  -> Exit sdr# when sdr# is out of lock.
  -> Lrpt ends automatically after sdr# exit.
  -> GIS starts the calculation.
  -> GIS ends automatically when the calculation is finished.
  -> That's all. There should be 13 images.

Back to Top
Back to Home Page