145.825 MHz, 1200 bps, simplex un APRS via ARISS time JST RS0ISS-4>CQ,SGATE [09/15/07 01:59:50] <UI R>: >ARISS - International Space Station (BBS/APRS on) JE9PEL>APRS,RS0ISS-4* [09/15/07 02:01:10] <UI R>: ---------------------------------------------------------------------------- [UI-View32 - IgateLogs - RFToInetLog.TXT] 2007-Sep-21 23:46:34 JE9PEL>APRS,RS0ISS-4*::APRS :Hello via ISS de JE9PEL{55 2007-Sep-21 23:47:37 JE9PEL>APRS,RS0ISS-4*::APRS :Hello via ISS de JE9PEL{55 2007-Sep-21 23:49:00 JE9PEL>APRS,RS0ISS-4*::APRS :Hello via ISS de JE9PEL{55 http://www.ariss.net/index.cgi?absolute=1 20070921144926 : RS0ISS-4]CQ,SGATE,qAO,JE9PEL:]ARISS - International Space Station (BBS/APRS on) 20070921144907 : JJ1TJV]BEACON,RS0ISS-4*,SGATE,qAO,JE9PEL:Hello de JJ1TJV Mito-city in Ibaraki Japan. 20070921144726 : RS0ISS-4]CQ,SGATE,qAO,JE9PEL:]ARISS - International Space Station (BBS/APRS on) 20070921144531 : RS0ISS-4]CQ,SGATE,qAo,JH4XSY-1:]ARISS - International Space Station (BBS/APRS on) ---------------------------------------------------------------------------- # 1190385992 Fri Sep 21 23:46:32 JST 2007 IGATE RF->NET(N):JE9PEL>APRS,RS0ISS-4*,JH4XSY-1,I::APRS :Hello via ISS de JE9PEL{55 ---------------------------------------------------------------------------- Cf. http://kenweb1.kenwoodusa.com/KenwoodPortal/KenwoodComm/Resources/AMA_InstructionManuals/TMD700A_Specialized.pdf ---------------------------------------------------------------------------- Subject: [amsat-bb] ISS BBS usage From: Henk, PA3GUO Date: Fri, 14 Sep 2007 18:26:07 +0200 (CEST) Dear friends, As we are all so very excited to have ISS APRS back on, we also have seen that the BBS works fine as well. That good-old-Kenwood D700 rocks ! However, we need to be carefull using it ! Do not use C RS0ISS-4, it will block APRS. But do use C RS0ISS-11 instead. Kenneth N5VHO has written as summary some time ago: http://www.amsat.org/amsat/archive/sarex/200504/msg00002.html I have inserted that message in the bottom of this posting. Yesterday I used the BBS, it works fine. Please note the commands are case sensitive (use W instead of w) I have a log of my results at http://www.qsl.net/pa3guo (click on ISS APRS) Have fun, be smart, don't hog the downlink, enjoy ! Henk, PA3GUO ps: do not forget to disconnect on time (so way before LOS) +++++ COPY OF THE MESSAGE OF N5VHO +++++++ **If a station connects to the ISS mailbox, the following will be received: Welcome to RS0ISS's message board System Ver 1.50 112864 Bytes free CMD(F/K/M/R/W/B/H/?)> ****Please do not send an H or ?.***** The following help menu will be sent and it takes a lot of time. Considering the delay issues over some parts of the world, this could effectively eliminate any one else from using the system during that pass. W(rite) = Type W (callsign)<cr> to begin message entering. Subject: = Header (max 30 characters) are entered after the prompt: "Subject". Ending the header with a carriage return <cr>. Message: = Message are entered after the prompt: "Message". Ending each line with <cr>. You terminate with either a <cr>/EX<cr> or <cr><ctrl-Z><cr> to the indicate end of your message. B(ye) = Type B<cr> to DISCONNECT. F(ile) = Type F<cr> to show the latest 20 messages. L(ist) = Type L<cr> to show the all messages. M(ine) = Type M<cr> to show latest 20 messages (to or from you). Subsequent F or M command will show next 20 active messages. R(ead) = Type R n<cr> to show the number n message. A(bort) = Type A<cr> to Abort. J = Type J<cr> to show connect stations. K(ill) = Type K n<cr> to delete the number n message (only to or from you). H(elp) or ? = Type H<cr> or ?<cr> to display this. **When a B is sent to disconnect, the following is received. Thank you CU AGN 73 ---------------------------------------------------------------------------- ISS PBBS upload cmd:C RS0ISS-11 cmd:*** CONNECTED to RS0ISS-11 Welcome to RS0ISS's message board System Ver 1.50 110506 Bytes free CMD(F/K/M/R/W/B/H/?)> W ALL Subject: Japan Message: Hello via ISS /EX Thank you for your message. CMD(F/K/M/R/W/B/H/?)> B Thank you CU AGN 73 *** DISCONNECTED cmd:C RS0ISS-11 cmd:*** RS0ISS-11 busy *** DISCONNECTED RS0ISS-4>CQ,SGATE [09/24/07 21:44:01]: Welcome to RS0ISS's message board System Ver 1.50 110448 Bytes free RS0ISS-4>CQ,SGATE [09/24/07 21:44:03] : >ARISS - International Space Station (BBS/APRS on) cmd:C RS0ISS-11 cmd:*** CONNECTED to RS0ISS-11 Welcome to RS0ISS's message board System Ver 1.50 110448 Bytes free CMD(F/K/M/R/W/B/H/?)> F Msg# Size TS Date Time From To @ BBS Subject 23 19 /0433 JE9PEL>ALL Japan 22 16 15-Nov/0746 JE9PEL>ALL from JAPAN 21 29 15-Nov/0241 HS1JAN>ALL hello 19 46 $ 15-Nov/0026 PY1AT >ALL MSG 16 43 13-Nov/2139 VK4TEC>ALL Please QSL 14 43 13-Nov/0607 LW6DC >ALL saludos 73 1 63 B$ 11-Nov/1007 LU8YY >ALL saludos desde Neuquen 110448 Bytes free Next message Number 24 CMD(F/K/M/R/W/B/H/?)> R 23 Posted : 04:33:17 From : JE9PEL To : ALL @ BBS : Subject:Japan Hello via ISS CMD(F/K/M/R/W/B/H/?)> B Thank you CU AGN 73 *** DISCONNECTED