---------------------- Fo29tlme program Q&A ---------------------- --- Q1] Downloaded FO-29tlme + VB40032.dll a] Operates with the three (3) test files just fine. BUT b] How does this tie together with WISP32 ? A1] 'Fo29tlme.exe' program analyze automatically all digital telemetry data from FO-29 such as Current, Voltage, etc. This is a stand alone program that has no relation to 'WiSP'. --- Q2] What is telemetry frequency of F0-29 ? A2] JAS-2 (FO-29) Voice/CW Mode JA Uplink 145.900 to 146.000 MHz CW/LSB Downlink 435.800 to 435.900 MHz CW/USB Operational, rotated with digital mode and digi-talker. Digital Mode JD Uplink 145.850 145.870 145.910 MHz, FM Manchester Code Downlink 435.910 MHz 1200 baud BPSK Digitalker 435.910 MHz Operational, rotated with analog mode and digi-talker. Inverse heterodyne of FO-29, FO-20 Uplink Downlink 145.900 --- 435.900 145.901 --- 435.899 145.902 --- 435.898 : : 145.950 --- 435.850 : : 145.998 --- 435.802 145.999 --- 435.801 146.000 --- 435.800 i.e. Uplink + Downlink = 581.800 Feb 1 - 6th '00 JD1200 mailbox Feb 7 - 21st '00 JA Feb 22 - 27th '00 JD1200 mailbox Feb 28 - Mar 5th '00 JA etc. --- Q3] After you furnish the frequency---How is the signal recorded to a file in the PC ? OTHERWORDS---How does it all tie together ? A3] You need to get and save FO-29 telemetry data firstly with the other communication program when it's 1200bps digital mode. You need edit this data secondly. It's gave a detailed explanation on 'fo29tlme.txt' to edit.