AO-51 on MixW2

How to decode the sound of AO-51 on MixW2 without TNC
-----------------------------------------------------

 1. Click_right the volume button in PC.
 2. Click the adjustment of Audio_property.
 3. Click the audio tab.
 4. Click the volume button of the audio record.
 5. Check the button of the monaural mixer.
 6. Run MixW2.
 7. Mode - Packet
 8. Mode - Mode_settings - Modem - VHF_9600baud_G3RUH
 9. Configure - Soundcard settings - (your soundcard),
10. Preferred Sound card - Samplerate: 22050
11. Run Sound_Decoder "sndrec32.exe".
12  Playback "60220a51.wav" or "60221a51.wav".
13. http://www.ne.jp/asahi/hamradio/je9pel/ao51info.htm
14. Then the signals are decoded automatically on MixW2.

Back to Top

Back to AO-51 index

Back to Home Page