SatDump settings on LINUX
I could run SatDump and now I'm going one step further and setting things up.
https://www.satdump.org/posts/basic-usage/ (on Ubuntu18.04)
SatDump settings
[Terminal]
$ cd satdump/build
$ ./satdump-ui
[Settings-tab]
Creat: Output Directories - Save
[Recoder-tab]
Device: Generic RTL2832U OEM
Samplerate 1.024
LNA Gain 49(Max)
AGC OFF
Bias-Tee OFF
[FFT]
FFT Max 28.099 (properly)
FFT Min -150.000
[Processing]
NOAA APT
NOAA Satellite 19
Freq NOAA-19
[Recoder-tab]
Start
NOAA-19 APT
23:24UTC, 10 Jun 2023
SatDump on Ubuntu18.04
Source: IQ.wav @JE1CVL(Tnx)
[SatDump layer test]
"Add Layer-Tile Map(OSM)" do work in "SatDump-Viwer-Projections", but...
"Add Layer-Other" doesn't work evev if I press Add button. (on Ubuntu18.04)
(Ssolved). To do Layer, there is a procedure as shown in the image, especially
when selecting Layer on the map, I should have selected the top "Equirectangular"
instead of "Other". I don't know how to scale "Tile Map" and "Received Image"
as Layers exactly to fit. (Tnx> JE1CVL)
[SatDump layer successful]
JA5BLZ wrote:
> NOAA-15 APT was received using SatDump at this morning (Jun.17).
> I will report that an image that looks like Layer_Map was obtained.
> After receiving the signal, I changed to the "Viewer" and operated the next procedure.
>
> OS MINT21
> SatDump - Viewer - Products
> Load the generated "Product.cbor".
> Select "224" from RGB_Composites.
> Press the displayed Layer button.
NOAA-15 APT
08:17JST, 17 Jun 2023
SatDump on Ubuntu18.04
Source: product.cbor @JA5BLZ
Analized: Ishigaki_Island @JE9PEL/JR6
NOAA-15 APT
08:17JST, 17 Jun 2023
SatDump on Ubuntu18.04
Source: product.cbor @JA5BLZ
Analized: Ishigaki_Island @JE9PEL/JR6
Completed Product
NOAA-15 APT
07:39JST, 19 Jun 2023
SatDump on Ubuntu18.04
Source: product.cbor @JA5BLZ
Analized: Ishigaki_Island @JE9PEL/JR6
Completed Product
https://www.satdump.org/posts/basic-usage/
https://github.com/SatDump/SatDump/issues/
http://www.asahi-net.or.jp/~ei7m-wkt/numb1136.htm
