MOTOCOMPO

1 2 3 4

Assembling of the step

A part number 29.30.31.32 is cut off.

A part number 29.32 is to do punching as the photograph.

Assembling of the step

First, it is assembled to wrap a part 29,32 after a
part number 30.31 is assembled.

Gluing isn't done.

Assembling of the step

A part number 30.31 is installed in the body.

Assembling of the step

After that, a part 29,32 is inserted.
Gluing isn't done.
Assembling of the step

And, it becomes the condition that it is folded when
it is inserted in the place to do punching y the step z, too.
Assembling of the handle

A part number 21.22.23.24.25.26 is cut off.

A red line part is to do punching.

Assembling of the handle

It is assembled as the photograph.

It is assembled to wrap a part number 22.24 after
a part number 21.23 is assembled.
Assembling of the handle

A handle is installed in the body as the photograph.
Be careful of a left-right balance.

Give me an installation angle referring to the parts list.
Assembling of the handle

A part number 12.13 is cut off.

After it is laid, a part number 17.18 is cut off.

Do punching as the red line part.
This hole is the size which takes resistance
because it is installed without gluing rearview mirror.
Assembling of the handle

Assemble it as the photograph.

Assembling of the handle

It is assembled after a part number 25.26 is cut off.
Insert it as the photograph after that.

Assembling of the handle

Insert the part made by the above in the handle.

Assembling of the signal lamp and the meter

Cut off a part number 16.25.26, and assemble it as the photograph.

Assembling of the signal lamp and the meter

Install a signal lamp referring to the photograph.

Assembling of the signal lamp and the meter

Install a meter referring to the photograph.

An upper cover and assembling of the rearview mirror

A part number 28 is cut off.
After it is laid, a part number 33 is cut off.

An upper cover and assembling of the rearview mirror

A part number 28 is broken and installed as the photograph.
Gluing isn't done.
An upper cover and assembling of the rearview mirror

A part number 33 is inserted as the photograph.
Gluing isn't done.
Completion



Let's fold it, and play!

1 2 3 4