MOTOCOMPO

1 2 3 4

Assembling around the engine

A part number 54 is cut off.

A punching point is to go referring to the photograph
with 6 place in total.
Assembling around the engine

Bend a stand stopper as the photograph.

Assembling around the engine

It is cut off as the photograph after a part number 55 (stand) is laid.

Assembling around the engine

It tries to put a stand, and it is assembled.

A stand isn't glued.

Assembling around the engine

It is installed in the body.

Assembling around the rear

A part number 51 is cut off. Do punching as the photograph in 1 place.

After it is laid, a part number 52 is cut off as the photograph.
Assembling around the rear

A part number 52 is installed in 51.
Assembling around the rear

Install it in the body.

The installation of the tire

Install it referring to the photograph and the draft (parts list).

Assembling of the ignition plug

After a part number 56 is laid, it is cut off as the photograph.
Assembling of the ignition plug

They are the conditions that a part number 56 was installed in the body.

Assembling of the exhaust muffler

A part number 58 is cut off.
Assembling of the exhaust muffler

It is installed in the body with bending an exhaust pipe a little
as the photograph.

1 2 3 4