MOTOCOMPO

1 2 3 4

A tire is assembled.

Part number 1.2.7.8

Part NO. 1.7 is to bring down the both sides as the photograph after you put it and put it together.
A part 2.8 does punching three places after it is cut off as the photograph.
A tire is assembled.

Part number 1.2 is assembled.

Because they are the same parts, a part 2.8 doesn't care even about which.
A tire is assembled.

Part number 7.8 is assembled by the same point.
A tire is assembled.

Part number 3.4.9.10 is assembled.

There is no problem even if a part number is forgotten because it is the size which both a front tire and a rear tire are the same as.

And, after one side is glued as the photograph, a part is installed from the opposition side, and a part has already been installed at the end in one, and it completes it.
A tire is assembled.

It is completed condition.

The left of the photograph is a front tire.
The one on one side as the way of distinguishing it a nut (the right of the photograph) is a wheel for the rear.


A tire is assembled.

A part number 5 is assembled.
A tire is assembled.

A part number 5 is installed in the front tire.B

Over and again, don't install it in the rear tire.
A tire is assembled.

A part number 11 is assembled.
A tire is assembled.

A part number 11 is installed in the rear tire.
Assembling of the tire cover

It is assembled after a part number 6 is cut off.

Put roundness on the form a little.
Assembling of the tire cover

A part number 6 is installed in the front tire.

A tire is to stick to the cover to make it fix it.
Assembling of the front fork

Cut off a part number 43.44.45.46.
Assembling of the front fork

It is assembled as the photograph.

Assembling of the front fork

A front fork is installed in the front tire.

Adjust it not to warp as much as possible referring to the draft (parts list).
Assembling of the body

A part number 48 is cut off.

Do 2 place, punching as the photograph.
The place to do punching was expanded and seen.

Assembling of the body

Assemble it without sticking at a stretch.
Assembling of the body

It is an assembling example.

Assembling of the body

A part number 47 is cut off.

Three places are to do punching as the photograph.
Assembling of the body

It is the condition that a part number 47 is assembled.
Assembling of the body

It is the condition that a part number 47 is installed in the part number 48.

1 2 3 4